Put the Fluke 414D on your tool belt and reach beyond the common tape measure. Measures up to 50 meters (165 ft). This professional-grade laser distance meter is fast and easy to use, improving accuracy and reducing measurement errors. You’ll save time and money at every step
|Typical measuring tolerance 1||±2.0 mm 3|
|Maximum measuring tolerance 2||±3.0 mm 3|
|Range At Leica Target Plate GZM26||50 m / 165 ft|
|Typical range 1||40 m / 130 ft|
|Range at unfavorable condition 4||35 m / 115 ft|
|Smallest unit displayed||1 mm / 1/16 in|
|Ø Laser point at distances||6 / 30 / 60 mm (10 / 50 / 100 m)|
|Measuring tolerance to laser beam 5||No|
|Measuring tolerance to housing 5||No|
|Laser type||635 nm, < 1 mW|
|Automatic laser off||After 90 seconds|
|Automatic power off||After 180 seconds|
|Battery life (2 x AAA) 1.5 V NEDA 24A/IEC LR03||Up to 3,000 measurements|
|Size (L x W x D)||116 x 53 x 33 mm|
|Weight (with batteries)||113 g|
|-25°C to +70°C (-13°F to +158°F)|
|0°C to +40°C (32°F to +104°F)|
|Calibration cycle||Not applicable|
|Maximum altitude||3000 m|
|Maximum relative humidity||85% at 20°F to 120°F (-7°C to 50°C)|
|Safety||IEC Standard No. 61010-1:2001|
|EN60825-1:2007 (Class II)|
|1. Applies for 100% target reflectivity (white painted wall), low background illumination, 25°C.
2. Applies for 10 to 500% target reflectivity, high background illumination, -10°C to +50°C.
3. Tolerances apply from 0.05 m to 10 m with a confidence level of 95%. The maximum tolerance may deteriorate to 0.1 mm/m between 10 m to 30 m and to 0.15 mm/m for distances above 30 m.
4. Applies for 100% target reflectivity, background illumination between 10’000 lux and 30’000 lux.
5. After user calibration. Additional angle related deviation of ±0.01° per degree up to ±45° in each quadrant. Applies at room temperature. For the whole operating temperature range the maximum deviation increases by ±0.1°.